China Air Purifier Manufacturer: November 2018

Tuesday, 27 November 2018

Enssu Teach You How To Cut Baby Hair With Baby Hair Clippers/Trimmer/Shaver

Enssu started their business from Baby Hair Clipper,Baby Hair Trimmer And Baby Hair Shaver.We have design,develop,manufacturing and selling child friendly hair clippers many years ago.And allo of our products we have our own mould for it.

Today Enssu teach you how to cut baby hair with baby hair clippers/trimmer/shaver

Knowing how to cut baby hair with baby hair clippers can be a useful skill to have. If you know how to cut and trim baby hair with the help of bay hair clippers, you can cut and style your own hair. This can save you a lot of money in the long run because you won’t have to visit your barber regularly anymore. You can even help your friends save money on barbershop expenses if you volunteer to cut their hair, too.

So, how do you cut your baby hair with baby hair clippers? Here’s a step-by-step guide to giving yourself a haircut with the help of professional clippers.

Invest on a hair clipper with a set of guide combs. The guide combs will give you more control and allow you to cut your hair more evenly. Not only that, they protect your scalp from injury. For short haircuts, use shorter guide combs. If you want longer hair, use longer guide combs.
Always start your hair cutting by washing your hair thoroughly. It’s easier to cut baby hair when it’s clean and free from grime. Pat your hair dry with a towel.
Attach your desired guide comb to your clippers. Make sure that the guide comb is held securely onto the clippers. Otherwise, you may end up injuring yourself.
Turn the clippers on and hold it downward and flat against your forehead. From your forehead, move the clipper to the back of your head. Repeat that until you’ve evenly cut the hair off the crown of your head.
To cut the hair on the sides of your head, hold the clipper flat against the lower tip of your sideburns. And then, move it upward until the clipper reaches the point where your head starts to curve up to the crown. Repeat this step until you’ve trimmed your sideburns and cut away the hair on the sides of your head.
To cut your hair from the back, hold the clipper upward and against the nape of your neck. And then, run it up to the point where the back of your head curves into the crown. Once again, repeat this step until you’ve got the hair on the back of your head all out.
Use scissors to trim the excess hair. Don’t hesitate to use the clippers again if you see that you’ve missed a few spots.
Brush your hair to get all the cut baby hair off your head. Take a shower if you must. If you used these steps to give yourself a buzz cut, apply aftershave or alcohol along your hairlines to prevent infection and razor burns.

Cutting your own hair is not difficult at all. As long as you have a good hair clipper, the appropriate set of guide combs, and all the tools that you need to give yourself a good haircut, you can do away with visiting your barber every month. This way, you can save money and experiment with your hairstyle however way you want.

You need to have a good set of baby hair clippers to cut your bay hair successfully and safely.Enssu baby hair clippers are definitely some of the best tools for cutting hair available today.

About Enssu:

Enssu design, develop, manufacture and sell baby nursing & feeding electric appliances such as Baby Hair Clipper/Trimmer, Baby Feeding Bottle Warmer, Baby Thermostat, Baby Feeding Bottle Sterilizer, Baby Electric Nail Polisher, etc.

For more about Enssu,Please contact:

Company:Guangzhou Enssu Baby Products Co., Ltd.

Contact Person:Tommy Zhong

Tel:0086-20-87235622

Mobile:0086-13760626278

Add:6/F, D Block, Jingnan Industrial Park, Panyu District, Guangzhou, P. R. China

Email:info@gzenssu.com

Web:https://www.gzenssu.com

Article Original From:https://www.gzenssu.com/enssu-teach-you-how-to-cut-baby-hair-with-baby-hair-clipperstrimmershaver/

Monday, 26 November 2018

The Basics Of A Baby Hair Clipper –What You Need to Know About Baby Hair Clippers

Baby Hair clippers are personal grooming devices that are used for baby shaving, trimming, and cutting head hair. They are made up of sharp blades mounted on long handles made from plastic or steel. Depending on what you’re more comfortable with you can go for a manual baby hair clipper or be more savvy with an electric one.

Types

The manual hair clipper was invented in the 19th century, relying on a person’s hand power to trim and cut hair. It is made up of just two rows of sharp blades along with teeth that are used to cut through hair. The manual hair clipper is still pretty much used in traditional barber shops these days. On the other hand, the electric hair clipper is made with rust-resistant, titanium blades that never dull. Sometimes also called the corded hair clipper, it runs on a magnetic motor that cuts and trims hair at high speeds. In the same way that manual Baby Hair clippers are staples at traditional barber shops, electric Baby Hair clippers are key tools in modern-style professional salons and barber shops.

Buying tips

Here are a few things for you to keep in mind when buying Baby Hair clippers:

Comb Attachments: Look for Baby Hair clippers that allow you to use a number of comb attachments (up to 10 in some), differing in type and length, which then allows you to come up with a wider range of styles.

Blade Guards: To keep the blades of a hair clipper sharp as well as rust-free, look for one that comes with blade guards. Take note as well that blade guards always have to be replaced after each use.

Accessories: If you’re looking for a professional hair cutting kit for starters, choose Baby Hair clippers that come with styling combs, barber capes, cleaning brushes, shears, and oil. This covers everything you need to start.

About Enssu:

For more about Enssu,Please contact:

Company:Guangzhou Enssu Baby Products Co., Ltd.

Contact Person:Tommy Zhong

Tel:0086-20-87235622

Mobile:0086-13760626278

Add:6/F, D Block, Jingnan Industrial Park, Panyu District, Guangzhou, P. R. China

Email:info@gzenssu.com

Web:https://www.gzenssu.com

Article Original From:https://www.gzenssu.com/the-basics-of-a-baby-hair-clipper-what-you-need-to-know-about-baby-hair-clippers/

Automatic Ultrasonic Welding Machines For Sale – Where To Find The Best Used And New Welding Machines Available Online

Huizhou Shengyang Industrial Co., Ltd is specialize in R&D and manufacturing electronic equipment industry manufacturing automation equipments.Our products including ultrasonic welding machine,automatic welding machine,automatic screw locking machine, automatic screw tightening machine, automatic screw feeder machine, Turbine air blowing automatic feeder, Coordinate machine, Automatic dispenser, Peristaltic dispenser, Automatic glue filling machine, Automatic soldering machine.

Today we will talking about where to find the best used and new welding machines available online.

Ultrasonic welding machines for sale can be really difficult to find sometimes, however if you have the right resources you should be able to find one really easily. Whether you want to buy an industrial machine that is used or new, you need to know that what you are buying will be efficient and safe at the same time.

There are a lot of brands of ultrasonic welding machines to choose from. You might be looking for a Hobart welding equipment which will provide great quality. Also other companies make great welding equipment that can do the job that you need to get done. The best way to find the right kind of welding equipment that you’re looking for is to compare them on a website like Amazon or eBay.

I don’t recommend that you buy your welding equipment from Sears or classified ads because they will charge a way too much money and not give you the kind of price guarantee, and safety guarantee, that you need to ensure that you get.

If you’re looking to buy a used ultrasonic welding machine then you can also find one fairly easily on the Internet. If you do price comparison shopping correctly, then you should be able to find exactly what you need from these websites. Just make sure that wherever you buy your welding equipment from, they give you a 100% satisfaction guarantee. You never want to buy something on the Internet and then not have the option to be able to return to the store.

If you’re thinking about buying a ultrasonic welding machine. In doing this search you will find a lot of places that sell ultrasonic welding machines that are not reliable. The offer your product and then do not give you the kind of guarantee that you will need to be satisfied, and when you are not satisfied they will not give you a return on your investment. Not having this kind of customer satisfaction can make someone feel very unsatisfied with the transaction, and that is something that you should always try to avoid. That is why you should do a lot of research before handing over your money for welding equipment for sale.

Welding equipment for sale are available all over the Internet. What you need to be thinking about is how much you are willing to pay for your ultrasonic welding machine. If you want to pay the most money than you can get a new ultrasonic welding machine, but you will be paying a lot more than if you get a usable machine. Use welding equipment can be just as good as new ones, but they don’t come with a shiny new packaging and sometimes they will carry less of a guarantee than new welding equipment. This is completely up to you.

Whatever decision you make, when you are comparing ultrasonic welding machines for sale just make sure that you don’t let yourself get ripped off. Like I said before, make sure that the company offers you 100% guarantee, check the safety specifications on the welding equipment that you are purchasing, and make sure that you are buying from a trusted company. If you do all that you will be very happy with your welding equipment.

Do you want to find the best ultrasonic welding machines available online?

Visit Ultrasonic welding machines For Sale https://www.automaticchina.com to find the best deals on used and new ultrasonic welding machines.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Contact:
Person: James Yuan
Company: Huizhou Shengyang Industrial Co., Ltd
Add: 5th Floor,D Building,Jintaiyang Industrial Zone,Xingye Road,Zhongkai District,Huizhou,Guangdong,China
Tel: 86-752-6682869
Mobile:+86-13352636504
Email: info@automaticchina.com
Site:https://www.automaticchina.com/product-category/ultrasonic-welding-machine/

Article Original From:https://www.automaticchina.com/automatic-ultrasonic-welding-machines-for-sale-where-to-find-the-best-used-and-new-welding-machines-available-online/

Tuesday, 20 November 2018

Operating Principle Of Ultrasonic Welding Machines For Sale From Welder Machine Suppliers

Generally speaking, ultrasound refers to acoustic frequencies above 20 thousand hertz, which is the upper limit of the range of human hearing. However, these frequencies are audible to certain animals such as mice, bats, dolphins and dogs, all of which have a higher hearing range compared to humans. The inability of humans to listen to ultrasonic waves is caused by the middle ear, which acts as a low pass filter.

The ultrasonic welding machines of Huizhou Shengyang Industrial Co. Ltd offer many advantages over other welding techniques and are the most used in the manufacture of wire harnesses, electronic components and equipment. Ultrasonic welding is used when it is necessary to weld multiple layers of metal foil to a terminal or to weld together with different combinations of metals such as copper, aluminum, lithium and nickel.

Ultrasonic welding makes use of low friction welding process that produces little heat and allows better control. The basic idea is to rub the work pieces against each other while holding under pressure to make a connection. The work pieces are placed on an anvil that is knurled with fine ribs that bite the material and hold it in place during the welding operation. The ultrasound machine is then lowered onto the parts, clamping them under pressure and generating the required washing action. This tool vibrates at a frequency of twenty kilohertz for most welds and forty kilohertz for low power applications.

The washing action helps disperse the oxide layers and other impurities in the interface until the base metals are in direct contact. The atoms of the pieces diffuse among themselves and form a purely metallurgical connection.

The ultrasonic welds are limited by the size of the horn (sonotrode) from which they are made. The size of the horn, in turn, is determined by the wavelength of the ultrasound energy used. As a result, ultrasonic welds rarely measure more than 3 inches unless adjustments are made to the welder or special shapes such as spot welding or rotary speakers are used.

Ultrasonic welding techniques are used in various industries, for example, B. in pharmaceutical, medical, food, cosmetic, domestic and personal care. They have made it possible to eliminate minor defects in products during the production process that, if left unchecked, can affect the brand value of a product or company.

In ultrasonic plastic welding, high frequency sound waves generate internal friction in the parts, which heat and join the plastic parts. This is a fast welding process and can be performed without interruption for long periods of time.

Welded plastic parts are relatively less stable than welded metal parts. Plastic welding is only carried out in cases where it is very difficult to obtain a replacement, or in cases where the lack of availability of the plastic component can affect the production or manufacture.

Plastic welding techniques involve a hot gas welding process in which hot air is directed to the films to be joined, thus converting them into the liquid form.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Blog:https://flipboard.com/@automaticchina/automatic-ultrasonic-welding-machine-and-automatic-screw-tightening-machine-33llvud4y
Email: info@automaticchina.com
Site:https://www.automaticchina.com/product-category/ultrasonic-welding-machine/

Article Original From:https://www.automaticchina.com/operating-principle-of-ultrasonic-welding-machines-for-sale-from-welder-machine-suppliers/

Monday, 19 November 2018

How Ultrasonic Welding Machines Work For Plastic Manufacturing Companies

Ultrasonic welding can be explained as high frequency vibration waves for an ultrasound of the piece to be welded. The pieces come together under high level of pressure, which results in the resistance of the weld. Plastics are the pieces that are normally used in this type of welding.

An interesting fact is that ultrasonic welding works best with similar or identical material layers. The welding of different plastics is possible by both methods, but requires special equipment and/or process adjustments to be successful.

The ultrasonic vibrations allow the welder to weld the materials together without having to use bolts and nails or other materials to join the pieces together. The vibrations are applied to thermoplastics as they melt, and the vibration is like a magnet that contracts the parts to push them.

An ultrasonic welding machine is used for various types of materials; one of the main materials in which it is used is metal. For metal, the welding process is known as friction welding of the work piece. A welding sonotrode is a type of horn from which weld vibrations emanate. The sonotrode softens the plastic so that the plastic becomes thermoplastic and can be joined. Any type of material used for welding has a different resistance. Metal has the strongest bond and this is because it is welded with ultrasonic waves.

Ultrasonic welding machines from Huizhou Shengyang Industrial Co. Ltd. are fast, clean and energy efficient. They produce strong and durable bonds that are as strong or even stronger than the starting materials. It does not need adhesives, solvents, or other additives.

Ultrasonic welding can be used when several jobs must be performed. This form of welding will make work faster and is a very successful method. In the automotive and electronics industries, this method is often used to weld your products because it requires a lot of inventory to be employed. Metals, hard plastics and soft plastics are all materials that can be used with the ultrasonic welding process. Since ultrasonic welding of the above materials is so successful today, it is currently investigating how well it works with other types of materials. Ultrasound was in great demand for other products, so it should be explored. For example, there are some underwater welding schools where everything is explained in detail.

In order for ultrasonic welding machines to work perfectly, two materials must be able to be connected to each other at high pressure. An anvil is used to position the parts where they should go, so that they can adhere to them to bond. The sonotrode horn also requires an ultrasound stack to adjust it to the correct vibration state. Next, a high-power AC ultrasonic generator is needed to adjust the stacking resonance. A controller is also required to maintain the movement of the press and the way it provides the ultrasound energy. In the future, you can expect ultrasound energy to be used for several other bonding projects, as it is very popular among many manufacturing companies.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article Original From:https://www.automaticchina.com/how-ultrasonic-welding-machines-work-for-plastic-manufacturing-companies/

Saturday, 17 November 2018

The need of automatic welding machines in different industries with low price from china manufacturer

Discussion of the need of automatic welding machines in various industries

The requirements for automatic welding machines in various industries are the following:

The machines are necessary in the manufacture of transformers, parts of machines, fabrication and manufacture of electronic control. The automotive industry relies on these machines to provide them with the designs and shapes of the vehicles.

These are also necessary to control and give unique designs to the steel plants and steel processing industries.

The special purpose of the welding machine is needed in the designs for the work and production requirements of the client. This category of welding also includes the automation of SPM machines.

The machines contain the requirements for the minimum superposition of the welders, as well as the preparation welding and the C-frame equipment.

These machines are also useful for the wire industry that makes wires, cables, and other wire products.

The demand for different products is rising with each passing day. Therefore, it is very important to improve the quality of the machines in all aspects. A butt welding machine is one of the newest resistance devices that meet the requirements by providing bond strength 25% greater than that of the base metal.

They offer the following benefits to clients.

The device is portable in size and can be transported easily from one place to another in a vehicle.
Its operation is the most important advantage of this machine. It is very easy to use and anyone can do it easily.
The casing of the main controls and the welding transformer are ventilated, and the construction of the alloy steel makes them perfect.

How to choose the right welding machine?

Welding machines are required in the industry for professional construction and the design of different objects. There are several types of machines that work mainly for arc welding and resistance welding. Metal is the substance that needs to be welded.

Well, the important thing now is, how should an industry select the right machine at a low price? The answer should be based on the relationship of the industry with the trusted provider. Dealing with a specialist who knows perfectly the different types of welders can provide better guidance.

Before buying an automatic welding machine, you must first check whether it is the best solution or not. You need to understand that it is different from plasma cutting. In welding, two parts of similar metals are joined by fusing and joining them together. On the other hand, plasma cutters are used for cutting during metal fabrication. Many confuse the two or mistakenly assume that plasma cutting and welding can be done with just one machine.

Another thing to consider is the power and portability available. If the automatic welding machine is purchased from Huizhou Shengyang Industrial Co. Ltd for use in a store, it may not be very portable and will have significant access to power at all times. On the other hand, high performance on-site repairs require a package that can handle different types and sizes of metal effectively and at the same time be easy to transport.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Contact:
Person: James Yuan
Company: Huizhou Shengyang Industrial Co., Ltd
Add: 5th Floor,D Building,Jintaiyang Industrial Zone,Xingye Road,Zhongkai District,Huizhou,Guangdong,China
Tel: 86-752-6682869
Mobile:+86-13352636504
Blog:https://flipboard.com/@automaticchina/automatic-ultrasonic-welding-machine-and-automatic-screw-tightening-machine-33llvud4y
Email: info@automaticchina.com
Site:https://www.automaticchina.com/product-category/automatic-welding-machine/

Article Original From:https://www.automaticchina.com/the-need-of-automatic-welding-machines-in-different-industries-with-low-price-from-china-manufacturer/

Thursday, 15 November 2018

Plastic Ultrasonic Welding Process Overview In Electronics And The Automotive Industry

Huizhou Shengyang Industrial Co., Ltd. is specialize in R&D and manufacturing electronic equipment industry manufacturing automation equipments.Our products including ultrasonic welding machine,automatic welding machine,automatic screw locking machine, automatic screw tightening machine, automatic screw feeder machine, Turbine air blowing automatic feeder, Coordinate machine, Automatic dispenser, Peristaltic dispenser, Automatic glue filling machine, Automatic soldering machine and so on.

Today Huizhou Shengyang will tell you something about ultrasonic welding.

Ultrasonic Welding is a process where the high frequency vibrations of an ultrasound are applied to a piece that is to be welded. The pieces are put under pressure and held together until they create what is know as a solid state weld. Usually there needs to be a frequency between 20 and 40kHz in order for this to work. This type of welding is used for plastics and for joining two different materials.

By using an ultrasonic vibration there is no need for bolts, nails, soldering or adhesives to keep the materials together. By using these vibrations on thermoplastics melting occurs on the plastic as it pulls in the energy of the vibration, which is pulled across the joint that needs to be welded. On metals, ultrasonic welding happens when the material is taken through friction welding.

The vibrations from the ultrasonic welding machine are produced by a welding sonotrode (horn) and they soften the thermoplastic material along the line of the joint. The equipment that is used will determine how strong the weld is and this will depend on how the equipment is designed, the materials to be welded and their properties and how the joint is designed.

The time it takes ultrasonic welding to happen is very short and for mass production this type of welding works very effectively. This type of welding will be used in the automotive industry for light clusters of things that need done and in producing electronic products like the casings in mobile phones.

Ultrasonic welding is used to weld both hard plastics and soft plastics and some metals. Today the machines are able to even do semi crystalline types of plastics. There is research and testing going on to see how this process works because not everyone has understood the power of this process. They are studying areas like how the process parameters of something to be welded with relate to the quality of the weld.

The process has needed to be studied because there has been more of a demand for different types of plastics and for electronic pieces which are best made by this process. In many respects it is still a developing field.

Ultrasonic welding machine is made up of several components. Some of these components are:

It needs a press that can hold two different parts that will be put under pressure.

An anvil to put the parts in place to take on the elevated frequency vibration that is needed to hit the pieces.

Something called an ultrasonic stack that has a converter that holds the horn that needs to be tuned to the specific frequency.

An electronic ultrasonic generator that can deliver a higher power AC signal that can match the frequency that matches the resonance of the stack.

A controller that can control the movement that the press will make and how it delivers the ultrasonic energy.

Ultrasonic welding machine can be found in many different areas beyond electronics and the automotive industry. This process is also used in the electrical area, with computers, with aerospace and with the packing and medical industries.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

ArtIcle Original From:https://www.automaticchina.com/plastic-ultrasonic-welding-process-overview-in-electronics-and-the-automotive-industry/

Wednesday, 14 November 2018

Usefulness Of Ultrasonic Welding Machine For Your Production Line

Ultrasonic Welding machines for assembling complex thermoplastic parts, easily be adapted to the accurate measurements of the parts to be welded together. The parts are sandwiched between a tightly formed nest, and a low amplitude acoustic oscillation of ~ 20 kHz is emitted, and a sonotrode (horn) connected to a transducer.

During welding of plastics, the interface between the two parts is specifically designed to make the melting process concentrated. One of the materials usually has a spiked energy director, which makes contact with the second plastic part. The point of contact between the parts is melted by the ultrasonic energy which creates a joint. Such a process is a sound alternative to screws, glue, or snaps designs. Typically, it is used with small parts such as cellular phones, consumer electronics, disposable medical tools, toys, etc. but it can be used on parts as large as instrument cluster of an automotive.

Ultrasound can also be used to weld metals, but is typically limited to small welds of thin deformable metals, e.g. nickel, Aluminum, and copper. When welding the chassis of an automobile or when welding together parts of a bicycle, no ultrasound would be used because of the required power level.

Localized melting of the plastic is caused by Ultrasonic welding of thermoplastics due to the vibrational energy absorbed along the joint to be welded. For metals, welding takes place as a result of the dispersion of surface oxides under high pressure and the local movement of the materials. Although there is a warming, it is not enough to melt the base materials.

Ultrasonic welding machine from Huizhou Shengyang industrial Co. Ltd can be used for metals and both hard and soft plastics like semi-crystalline plastics. Research and testing has increased the understanding of ultrasonic welding. The invention of more sophisticated and cheaper devices and the increased demand for plastic and electronic components have led to a growing knowledge of the basic process. Many areas of ultrasonic welding, however, require further investigation, for example, the relationship of process parameters and weld quality. Ultrasonic welding has continued to be a rapidly developing field.

Product features include:

Nonpolar and amplitude adjustment: During the adjustment process, the amplitude can be increased or decreased immediately; it can also be adjusted to prevent the rubber parts from welding perfectly, effectively reducing burns and penetration. The defective product setting range is around 10% ~ 100%.
Automatic frequency hunting: intelligent frequency control system, eliminate the inconvenience of automatic detection of ultrasonic overload, manual frequency modulation, automatic adjustment to the optimum frequency band, and tracking the best resonance point to achieving stable operation of the machine and vibration group temperature at its lowest point.

The welding head frequency increases with the frequency and the machine adapts automatically.

Frequency offset protection, mold power is too high protection, and total output is too great protection. The welding accuracy is higher and finer to protect the machine. Operation is easier, the welding head is replaced, the power supply is restarted as the welding head is fixed.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article Original From:https://www.automaticchina.com/usefulness-of-ultrasonic-welding-machine-for-your-production-line/

Types Of Automatic Welding Machines From China Manufacturer Huizhou Shengyang Industrial

People invented the first gas welding torch for melting metal with focused heat locally. These burners made room for arc brazing, which produced even more intense heat. The TIG welder is one of the most versatile welding machines that can more accurately determine heat, allowing for smaller precision welds. Another popular type of soldering machine that is used today is the MIG welder.

Arc welding

The industry uses arc welding or bar welding in a number of applications, including construction and repair work. This type uses either DC or AC welding power to form an electric arc between the base material and the electrode to melt metals at the melting point. It is covered with flux to protect the welding area from oxidation and contamination.

There are two types of arc welding machines which consist of oil or air cooled DC welders or AC welders that make use of air cooling system. An Arc welding is limited to brazing ferrous metals only.

MIG welding

MIG or Metal Inert Gas Brazing is an automatic or semi-automatic arc welding process. It is also known as Gas Metal Arc Welding. This process comprises a consumable and continuous wire electrode and shield gas, which are passed through a MIG torch or the CO2 melt gun. A DC source is normally used with a MIG welder, although AC is the second choice. One of the advantages of these soldering machines is that voltage, current and speed are adjustable. These machines also have a variety of voltages and valves to control the gas flow. A MIG welder that is used in a welding process without shielding gas is known as core flux arc welding. With this method, the wire used for welding has a flux-filled core and a hot arc that has the capability of welding thick pieces of metal.

TIG welding

Tungsten inert gas soldering or TIG soldering is a process in which a tungsten electrode which is non-consumable powers the welding arc for welding. To protect the weld area from contamination, Argon gas is typically used as a shield. Typically, a TIG weld is used in the welding of thin parts of magnesium, aluminum, stainless steel and copper alloys.

Rent and lease new and used automatic welding machines, including used TIG welders and used MIG welders from Huizhou Shengyang industrial Co. Ltd. There are many welding centers offering this service.

Welding Processes

The type of welding equipment required depends on the job, since soldering on land, under water and even in space is possible. However, most of the welding equipment used in factories, in construction and in manufacturing are for forging, arc brazing, gas, friction, robotic brazing, resistance brazing, etc.

The most common type of brazing is gas brazing, also referred to as oxyacetylene welding; this is because acetylene and oxygen gases mix to produce a very high temperature on the burner to melt the edges of the metal being worked upon. This is very popular as it can be used as a portable system. Arc welding is the process of creating an electrical current flow between the electrode and the material to be welded, thereby fusing them together.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article Original From:https://www.automaticchina.com/types-of-automatic-welding-machines-from-china-manufacturer-huizhou-shengyang-industrial/

Friday, 9 November 2018

Some Valuable Ideas for Automatic Welding Machines

It is never easy buying welding equipment like welding rotors. Nevertheless, these machines can damage your workshop equipment. If you work in heavy duty industry, you must regularly install cylindrical tanks and piping applications in your industrial plant. Traditionally, cranes had to be used, which is not only expensive, but also reduces productivity.

Ideal solutions for automatic welding machines

Today, we’re in luck, because 21st innovators have developed sophisticated automatic machines that help turn tanks or pipes when welding or finishing your product. Whether you are a small business or a heavy machinery workshop, you know that productivity will determine whether you compete globally or not.

For example, if you use a rotary roller or tank rotator in your workshop, the benefits you will derive include:

Lower labor costs as it is less burdened.
Increased efficiency, as automatic rotators are easy to control and precise.
Increased productivity as more work is done in one day and less of idle time.
Outstanding quality of the circumferential joints on the trays prepared in your workshop.
Better work positions when using pipe turner rollers to perform round seams in vertical positions.
Versatility in use: This helps to perform various functions in your workshop. For example, idler rolls may be adjusted to perform deposition of filler material and surface cladding on the inner or outer surface of a hollow cylinder.
Adaptation to your specific workshop requirements. Your manufacturer will ask for specifications in the production of tube reversing rollers or rotators.
Safer working environment where no high-risk heavy work is involved.
Improved strength and capability enabled by high performance chassis to handle the maximum weight of your applications.

Shopping for Your Automatic Welding Machines

Now that you know that a simple-looking weld rotator or rotary roller from Huizhou Shengyang industrial Co., Ltd can increase the efficiency in your welding factory, it’s important to understand that not all devices are exactly alike. When shopping for these machines, you must consider some of these factors:

Certification:

A good heavy machinery must be certified internationally. The CE approval is the most important product certification in this industry. Make sure all the products you buy have this standards approval.

Manufacturer Reputation: Ensure you buy from a company with the know-how and innovativeness to produce the most durable equipment. Before shipment, confirm from the manufacturer if you can physically visit the factory to check the automatic rotator or rotating roll. Any honest company will be pleased to have you. If they are not willing, you need to search for another supplier.
Guarantee: Customer service is important for automatic machines, and it is important to buy from a supplier who is willing to give a guarantee on every product you purchase.
Customization: It is important to work with a supplier who can lay out the rotors and turning rolls to your specifications.
Check lead time and shipping conditions: A reliable company should offer a favorable shipping policy and reasonable lead time to make sure the machines are in your workshop as soon as possible.

For more info about the automatic screw locking machine and automatic welding machine,please kindly contact us as below:

Article Original From:https://www.automaticchina.com/some-valuable-ideas-for-automatic-welding-machines/